in the past, rock slope stability analysis were performed either graphically or using a hand-held calculator, but nowadays there are variety of slope stability analysis which can be used according to the field condition and potential failure mode. in 2-d analysis, effect of convex and concave walls are neglected, however concave slopes are believed to be more stable than straight walls due to t...

In the past, rock slope stability analysis were performed either graphically or using a hand-held calculator, but nowadays there are variety of slope stability analysis which can be used according to the field condition and potential failure mode. In 2-D analysis, effect of convex and concave walls are neglected, however concave slopes are believed to be more stable than straight walls due to t...

rock slope stability depends very much on the strength features of the rock and the geometrical and strength characteristics of the discontinuities (e.g., roughness, wall strength and persistence). since a rock mass is not a continuum, its behavior is dominated by such discontinuities as faults, joints and bedding planes. also, rock slope instability is a major hazard for human activities and o...

Slope stability is one of the most important issues in open pit mining design. The main purpose of any open pit mine design is to propose an optimal excavation configuration, considering safety, ore recovery and financial return. An accurate pit slope design which accounts for the mine geology, structural geology, rock mass properties, and hydrogeology models of the mine area, drastically enhan...

The traditional slope stability analysis used the Factor of Safety (FS) from the Limit Equilibrium Theory as the determinant. If the FS was greater than 1, it was considered as “safe” and variables or parameters of uncertainty in the analysis model were not considered. The objective of research was to analyze the stability of natural slope, in consideration of characteristics of rock layers and...

Rock slope stability depends very much on the strength features of the rock and the geometrical and strength characteristics of the discontinuities (e.g., roughness, wall strength and persistence). Since a rock mass is not a continuum, its behavior is dominated by such discontinuities as faults, joints and bedding planes. Also, Rock slope instability is a major hazard for human activities and o...

A systematic quantitative methodology for the reliability analysis of stability of rock slopes is presented. A sliding mass resting on an inclined plane and composed of two blocks separated by a vertical tension crack is considered, and a disjoint cut-set system formulation is proposed, with each cut-set corresponding to a different failure mode of the slope. Methods for the evaluation of the s...

This paper researches two key factors (angle and thickness) of a weak layer in relation to their influencing mechanism on slope stability. It puts forward the sliding surface angle and morphological model criteria for the control of rock slopes and realization of its failure mechanism. By comparing the Failure Modes and Safety Factors (Fs) obtained from numerical analysis, the influence pattern...

The objective of this paper is to present a new rock mass classification system which can be appropriate for rock slope stability assessment. In this paper an evaluation model based on combining the Analytic Hierarchy Process (AHP) and the Fuzzy Delphi method (FDM)was presented for assessing slope rockmass quality estimates. This research treats the slope rockmass classification as a group deci...